List of Articles Mill

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Determining the Optimum Coagulant for Chemical Treatment of Fiber Wastewater from Pulp and Paper Mills
  هانیه میربلوکی shamim moghadami Fariba Ostovar
  10.29252/.1.1.0
  20.1001.1.26763060.1395.1.1.7.5
  Pulp and paper mills consider as a major wastewater producer industries in order to cellulosic pollution and also consuming high amount of water during the process.The wastewater treatment process is complicated because these kinds of effluents contain suspended & coll More

  Pulp and paper mills consider as a major wastewater producer industries in order to cellulosic pollution and also consuming high amount of water during the process.The wastewater treatment process is complicated because these kinds of effluents contain suspended & colloidal impurities and color & odor; so using chemical coagulants via the Jar test can be an appropriate alternative to remove the contaminants. In this research, different concentrations of Alum, PAC and FeCl3 coagulants were tested to reduce the contamination load of the effluent from three important major parts of fiber wastewater producers; that, according to the results FeCl3 was reported as the best chemical coagulants which removed 61%, 74/05 % and 58% of the COD from the three mentioned parts effluent. Therefore, chemical treatment by using of an appropriate coagulant with the optimum concentration can perform an important role in reducing the effluent contamination load. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Investigation of environmental effects of rubber waste and proposed methods in the management of this type of wastes
  علی ناهد
  Rubber is one of the materials that are widely used in industry and when they expire, they fall into the category of hazardous wastes. The release of rubber wastes into the environment causes many problems, including diseases, their bad landscape in nature, and terrible More

  Rubber is one of the materials that are widely used in industry and when they expire, they fall into the category of hazardous wastes. The release of rubber wastes into the environment causes many problems, including diseases, their bad landscape in nature, and terrible fires caused by their accumulation and environmental pollution. Also, rubber can be reused due to its non-degradability and elastic properties; as a result, the management of worn tires has a particular importance. There are several ways to manage rubber waste that can be safe and effective when done properly. These methods include sanitary landfilling, incineration, pyrolysis, milling, reuse at various scales, and re-coating. In this article, each method is reviewed and their advantages and disadvantages are stated. Also, there are examples of different applications of rubber waste in various industries. Manuscript profile